Magnet Shape: Block / Rectangle / Cube / Square / Bar
Material: Hard Ferrite (Ceramic)
Coating: No Coating
Grade(Chinese Stardard):         Y35

Detailed magnetic properties data:
Residual Magnetic Flux Density (Br): 4.3-4.5 KGs (mT):  430-450 mT
Intrinsic Coercivity Force (Hcj):    2.70-3.00 KOe    215-239 KA/m
Coercivity Force (Hcb):              2.73-3.03 KOe    217-241 KA/m
Energy Density (BH)max:              4.1-4.8 MGOe     33.1-38.2 KJ/m³
Operating Temperature:               -40 °C to +250 °C
Magnetisation Direction: Axial / Radially magnetized
Size (Can be customized according to customer drawings):
Total length (L):  12 mm
Total width (W):    12 mm
Total thickness (T):       10 mm
Tolerance:         +/-2% mm
Delivery time           7-25 days
Measurements

Type for flat round ceramic magnets :
Isotropic ferrite magnets
Anisotropic ferrite magnets
 
Manufacturing Process for flat round ceramic magnets :
1.    Dry process:
By dry process, can produce isotropic & anisotropic magnets. The tool can be changed and developed easily.
2.    Wet process:
By wet process, only anisotropic magnets can be produced. It is complicated to change the tool and the tooling charge is much higher.
 
Magnetization for flat round ceramic magnets :
1. Isotropic ferrite magnets are not oriented and can be magnetized in any direction;
2. Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.